Standard Description
Consisting of the strain balanced gear pump, DC motor, multi-functional manifold, valves, tank, ect., this power unit is intended to operate materials handling equipment. The decreasing motion is achived by the solenoid valve using the lowering velocity managed by an adjustable needle valve. The left and suitable functions are outfitted that has a dual pilot operated examine valve and cross-over relief valves.
Remark: Please check with our income engineer for the diverse pump displacement, motor energy or tank capability.
Exclusive Notes
one. This energy unit is of S3 duty cycle, i.e.,non-continuous operation,30 seconds on and 270 seconds off.
two. Clean all of the hydraulic components concerned in advance of set up of the power unit.
three. Viscosity on the hydraulic oil shoud be 15~46 cst, which should really also be clean and free of impurities.N46 hydraulic oil is encouraged.
four. This energy unit must be mounted horizontal.
5. Check the oil level inside the tank after the very first get started in the electrical power unit.
6. Oil shifting is needed soon after the original a hundred operation hours, afterwards once each 3000 hours.