The most typical systems for transmitting power from a drive to a driven shaft are belt, gear, and chain drives. But V-belt drive systems, also known as friction drives (because power is transmitted because of this of the belt’s adherence to the pulley) are a cost-effective option for industrial, auto, commercial, agricultural, and house appliance applications. V-belt drives are also easy to install, require no lubrication, and dampen shock load.
Here’s the catch: Regular friction drives can both slip and creep, resulting in inexact velocity ratios or degraded timing precision between insight and output shafts. Because of this, it is important to choose a belt befitting the application accessible.
Belt drives are one of the earliest power transmission systems and were widely used during the Industrial Revolution. Then, smooth belts conveyed power over large distances and were created from leather. Later, needs for better machinery, and the growth of large markets such as the automobile market spurred new belt designs. V-belts, with a trapezoidal or V shape, manufactured from rubber, neoprene, and urethane synthetic materials, replaced flat belts. Now, the improved overall surface material of modern belts adheres to pulley grooves through friction power, to lessen the tension necessary to transmit torque. The top part of the belt, called the tension or insulation section, contains fiber cords for improved strength since it carries the strain of traction push. It can help hold tension members set up and acts as a binder for greater adhesion between cords and other sections. This way, heat build-up is reduced, extending belt life.
We’ve designed our V-belts for wear, corrosion, and heat resistance with OE quality match and construction for reliable, long-lasting performance.
V-Belts are the most common type of drive belt used for power transmission. Their primary function is to transmit power from a main source, just like a motor, to a secondary driven unit. They offer the best mixture of traction, velocity transfer, load distribution, and extended service life. The majority are countless and their cross section is trapezoidal or “V” designed. The “V” shape of the belt tracks in a likewise designed groove on a pulley or sheave. The v-belt wedges into the groove as the load increases creating power distribution and torque. V-belts are commonly made of rubber or polymer or there may be fibers embedded for added power and reinforcement.
V-belts are generally found in two construction classes: envelope (wrapped) and raw advantage.
Wrapped belts have an increased resistance to oils and intense temperature ranges. They can be utilized as friction clutches during set up.
Raw edge type v-belts are better, generate less heat, enable smaller pulley diameters, increase power ratings, and provide longer life.
V-belts appear to be relatively benign and basic v belt china pieces of equipment. Just measure the best width and circumference, find another belt with the same measurements, and slap it on the drive. There’s only one problem: that strategy is about as wrong as possible get.