Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, electric fan motor china removed from unused 18” or 24” China Surroundings Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All the wiring in the middle of your electric motor, capacitor and quickness control switch is still installed however the cord itself is normally detached as seen in the photos. (Discover “Control Notice” below for alter type.)
T (See “App Notice” below for utilize in various other applications.)
Sizes: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft is certainly½” (0.500″) diameter x 2 ½” lengthy with a collection screw soft. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to become on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.
Control Take note: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH versions in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). In the event that you order several electric motor at the same time, we will do our better to supply your purchase with each one kind of control or the additional.
Application Note: Do NOT use this electric engine in a nonfan app. This is a totally enclosed fan electric motor and made to have continuous ventilation over the engine casing for cooling. The housing isn’t vented and the electric electric motor will overheat and enter automatic thermal overload if run in a nonfan program where there isn’t solid ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electrical motor for applications aside from 18 & 24″ TPI fans may possibly also overload the motor and lead it to proceed into automated thermal overload. (Your companion blade from another producer may have a steeper blade position.)
Origin: This electric motor is produced in China.