Equipped using the zero leak bidirectional checking sole-noid valves, this energy unit is developed to the operation of two independent circuits. Which are respectively for the key and subordinate platforms with the double scissors lift. Two cut-off valves are employed for lowering the machine manually in situation of energy loss. If far more independent circuits are expected for the application please get in touch with us for availability.
Remark: 1. Please consult our product sales engineer for that different pump displacement, motor energy or tank capability.
two. CSA or UL certified motors are available on request.
1. The AC motor is of S3 duty cycle, which can only operate intermittently and repeatedly, i.e., 1minute on and 9 minutes off.
two. Clean the many hydraulic elements concerned in advance of set up of the electrical power unit.
3. Viscosity in the oil shoud be 15~46 cst,as well as the oil should really be clean and no cost of impurities,N46 hydraulic oil is recommended.
four. The power unit really should be mounted vertically.
5. Check the oil degree from the tank after the preliminary running with the energy unit.
six. Oil shifting is needed right after the preliminary one hundred operation hours,afterwards when each 3000 hrs.