H-Elevate Quality eighty CHAIN FOR CHAIN SLING(EN818-two)
one. Special specification and marks can be manufactured in accordance to buyers
2. B. L= 4 occasions*WLL
3. Entire tracebility
four. Evidence examined to two ½ Occasions functioning load limit
5. Medium Tolerance
| Merchandise | Size mm | Pitch | Width | WLL | Proof Force | Min.Breaking Load |
Fat | |
| mm | Inside Min. mm |
Exterior Max. mm |
||||||
| t | kN | kN | kg/m | |||||
| G8S0618 | six | eighteen | 7.eight | 22.2 | 1.twelve | 28.three | forty five.two | .seventy eight |
| G8S0721 | seven | 21 | nine.one | 25.nine | 1.5 | 38.five | 61.six | 1.06 |
| G8S0824 | eight | 24 | 10.four | 29.6 | two | 50.3 | eighty.four | 1.38 |
| G8S1030 | ten | 30 | 13. | 37. | three.fifteen | seventy eight.five | 126 | 2.two |
| G8S1339 | thirteen | 39 | 16.nine | 48.one | 5.three | 133 | 212 | three.seven |
| G8S1648 | 16 | 48 | 20.8 | 59.2 | eight | 201 | 322 | 5.6 |
| G8S1854 | eighteen | 54 | 23.4 | 66.six | ten | 254 | 407 | 6.8 |
| G8S2060 | twenty | sixty | 26. | seventy four. | 12.5 | 314 | 403 | eight.six |
| G8S2266 | 22 | 66 | 28.six | eighty one.4 | 15 | 380 | 608 | 1.2 |
| G8S2678 | 26 | 78 | 33.8 | ninety six.2 | 21.two | 531 | 849 | 14.87 |
| G8S3296 | 32 | 96 | forty one.six | 118. | 31.five | 804 | 1290 | 22.29 |
For the purposes of this Element of EN 818,the following definitions use:
1. nominal measurement: Nominal diameter of the round part metal wire or bar from which the chain is manufactured.
2. material diameter: Diameter of the substance in the chain url as measured.
three. weld diameter: Diameter at the weld as measured.
4. length dimensionally influenced by welding: Length on either side of the middle of the website link, afflicted by welding.
five. pitch: Inner size of a hyperlink as measured.
6. manufacturing proof force(MPF) of chain: Force to which in the course of manufacture the entire of the chain is subjected.
seven. breaking drive( BF): Maximum force which the chain withstands for the duration of the system of a static tensile check to destruction.
8. working load limit (WLL) of chain: Optimum mass which the chain hanging vertically is approved to maintain in standard lifting service.
9. total ultimate elongation (A): Complete extension at the position of fracture of the chain expressed as a percentage of the inside length of the check sample.
ten. processing: Any treatment of the chain subsequent to welding, for illustration, heat treatment, polishing or dimension calibration.
eleven. lot: Specified quantity from which take a look at sample(s) is/are selected.
12. competent man or woman: A selected person, suitably qualified competent by understanding and useful expertise, and with the needed guidelines to enable the needed assessment to be carried out.
