higher efficiency china bucket elevator rubber belt
Introduction
THG/TDG Large Productive Bucket CZPT is the upgraded from TH/TD bucket elevator. Bucket elevator is made up of sprocket/drum, chain/belt, pushed unit, head area, middle casing and tail section and so on. Higher Efficient Bucket CZPT can be widely utilized in several industries this sort of as mining, mineral, chemical, agriculture, electricity, foodstuff and other industries and so on.
Advantages and Characteristics
one. Successful bucket elevator machine with massive ability, higher lifting height.
two. With types of buckets, to meet the prerequisite of different kinds of materials.
three. THG bucket elevator adopts alloy metal ring chain, right after surface area managing and warmth dealing with, reasonable hardness, high toughness, far better abrasive resistance.
four. TDG bucket elevator adopts metal cord rubber belt, great toughness, large energy.
5. CZPT, tail areas and middle housing circumstances with very good sealing, no material and dust leaked, with no pollution.
6. With holdback to avert materials backflow when shut down in an emergency.
7. Bottom adopts counter weight take-up device, make by itself automated consider-up, to avoid belt observe slip or chain just take off.
8. Improve velocity control sensor and mechanical level detector, it is matched by CZPT.
nine. Motor brand can be domestic or imported: Yutong, Shuangyu, ABB, Siemens, WEG and so on
ten.CZPT brand name can be domestic or imported: C&U, LYC, HRB , WZS, FAG, NSK, SKF and so forth.
CZPT Parameter:
| TDG Belt Bucket CZPT(with Sh bucket)CZPT Parameters Desk | |||||||||||
| Primary CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
| 160 | 200 | 250 | 315 | 400 | 500 | 630 | 800 | 1000 | 1250 | 1600 | |
| Ability Q(m³/h) | 32 | 45 | 72 | 101 | 158 | 220 | 348 | 492 | 788 | one.22 | 1541 |
| Bucket Quantity /L | two.six | 4 | seven | 10 | sixteen | twenty five | forty | sixty four | 102 | 161 | 255 |
| Pitch of Buckets /mm | 260 | three hundred | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
| Fat of traction belt&bucket for every meter(kg/m) | 22 | 21.5 | 33 | 33.2 | forty two.two | sixty two.three | seventy eight.fifty three | 106 | 145 | one hundred fifty five.five | 223 |
| Working Speed v/(m/s) | 1.two | one.2 | 1.34 | 1.34 | one.5 | 1.five | 1.sixty eight | 1.sixty five | 1.86 | one.86 | one.836 |
| Lifting top max/m | eighty | eighty | 80 | 80 | 80 | eighty | eighty | 80 | eighty | eighty | 80 |
| Be aware:the capability in the desk is calculated according to seventy five% of the fill issue. | |||||||||||
| TDG Belt Bucket CZPT(with Zh bucket)CZPT Parameters Desk | |||||||||||
| Major CZPT Parameters | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG | TDG |
| 160 | 200 | 250 | 315 | 400 | five hundred | 630 | 800 | one thousand | 1250 | 1600 | |
| Capacity Q(m³/h) | 24 | 31 | 51 | seventy four | 118 | 167 | 253 | 361 | 571 | 816 | 1112 |
| Bucket Quantity /L | one.9 | two.nine | four.6 | seven.4 | 12 | 19 | 29 | 47 | seventy four | 117 | 184 |
| Pitch of Buckets /mm | 260 | 300 | 325 | 360 | 420 | 460 | 520 | 580 | 650 | 720 | 820 |
| Weight of traction belt&bucket for each meter(kg/m) | 22 | 21.5 | 33 | 33.two | forty two.two | sixty two.3 | seventy eight.53 | 106 | 145 | one hundred fifty five.5 | 223 |
| Managing Pace v/(m/s) | one.two | 1.two | one.34 | one.34 | one.five | one.5 | one.68 | one.65 | one.86 | 1.86 | one.836 |
| Lifting peak max/m | 80 | eighty | eighty | eighty | eighty | eighty | eighty | eighty | 80 | eighty | eighty |
| Notice:the capability in the table is calculated according to 75% of the fill aspect. | |||||||||||
| THG Bucket CZPT(with Sh bucket)CZPT Parameters Desk | |||||||||||
| Major CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
| a hundred and sixty | 200 | 250 | 315 | 400 | five hundred | 630 | 800 | 1000 | 1250 | 1600 | |
| Capacity Q(m³/h) | 30 | 50 | 70 | 100 | 160 | 210 | 350 | 475 | 715 | 1120 | 1550 |
| Bucket Volume /L | two.6 | 4.1 | six.5 | 10 | 16 | 25 | 40 | 64 | 102 | 161 | 255 |
| Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
| weight of traction chain & bucket per meter(kg/m) | 31 | 31.85 | 33.four | forty three.25 | sixty.9 | 79.6 | 88.66 | 107 | 150 | 187.6 | 233 |
| Operating Pace v/(m/s) | 0.ninety three | .93 | 1.04 | 1.04 | 1.17 | 1.17 | one.32 | one.31 | 1.47 | 1.47 | one.47 |
| Lifting height max/m | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 55 | 55 | 40 | 40 |
| 1. Filling aspect ψ=1 2. Bucket quantity=Quantity of full water three. Optimum lifting peak = axis length of bucket elevator | |||||||||||
| THG Bucket CZPT(with Zh bucket)CZPT Parameters Desk | |||||||||||
| Major CZPT Parameters | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG | THG |
| one hundred sixty | 200 | 250 | 315 | 400 | 500 | 630 | 800 | a thousand | 1250 | 1600 | |
| Ability Q(m³/h) | 21 | 33 | 45 | 74 | 120 | 160 | 250 | 345 | 520 | 810 | 1110 |
| Bucket Quantity /L | 1.9 | 2.9 | four.6 | seven.4 | 12 | 19 | 29 | 47 | 74 | 117 | 184 |
| Pitch of Buckets /mm | 270 | 270 | 336 | 378 | 420 | 480 | 546 | 630 | 756 | 756 | 882 |
| bodyweight of traction chain & bucket per meter(kg/m) | 31 | 31.85 | 33.four | 43.25 | sixty.9 | seventy nine.6 | 88.66 | 107 | 150 | 187.6 | 233 |
| Operating Pace v/(m/s) | 0.ninety three | .93 | 1.04 | 1.04 | one.17 | one.17 | one.32 | 1.31 | 1.47 | one.47 | 1.47 |
| Lifting peak max/m | 75 | 75 | seventy five | 75 | 75 | 75 | 75 | 70 | 70 | 55 | 55 |
| 1. Filling element ψ=one 2. Bucket volume=Quantity of complete drinking water 3. Highest lifting height = axis distance of bucket elevator | |||||||||||
Selection Conditions
| ♦Material to be processed: _____ | ♦Material is corrosive or not: ____ (Ps. Of course or No) |
| ♦Handling capacity (Ps. It indicates the total | ♦Working surroundings is indoor or out of doors:________ |
| substance potential feeding from the inlet): _____t/h | ♦Material is liquid or not:___________(Ps. Indeed or No) |
| ♦Bulk Density: _____t/m3 | ♦Working atmosphere temperature: _______ ºC |
| ♦Lifting top of the elevator (distance between | ♦Upstream tools (Ps. It implies what variety of |
| inlet and outlet):__________m | gear is utilized to feed the substance): _____ |
| ♦Max. granule measurement of the feeding content: ____mm | ♦Downstream equipment (Ps. It signifies what type of |
| ♦Percentage of Max. granule in material:_________% | equipment is utilised to discharge the content): _____ |
| ♦Material temperature: _____ºC | ♦Working electrical power supply: _____V ______HZ |
| ♦water material:____% |
We mainly offer the pursuing toolss :
| Vibrating Screen | Rotary vibrating screen |
| Ultrasonic vibrating display | |
| Gyratory monitor | |
| Trommel display screen | |
| CZPT vibrating display screen | |
| Round vibrating display screen | |
| Dewatering display screen | |
| Vibrating feeder | |
| Belt CZPT | Belt conveyor |
| Sidewall belt conveyor | |
| Moveable belt conveyor | |
| Shuttle conveyor | |
| Tripper | |
| Bucket CZPT | Successful bucket elevator |
| Belt bucket elevator | |
| Ring chain bucket elevator | |
| Plate chain bucket elevator | |
| Cement bucket elevator | |
| Silo bucket elevator | |
| Screw CZPT | U-variety screw conveyor |
| Cement screw conveyor | |
| Pipe screw conveyor | |
| Scraper CZPT | Horizontal scraper chain conveyor |
| Incline scraper chain conveyor | |
| Grain scraper chain conveyor |
