Materials Handling Electrical power UNIT two
This power unit characteristics energy up gravity down circuit. Activate the begin solenoid to begin the motor to lift the machine. The lowing motion is activated by the solenoid valve using the lowering speed managed through the pressure compensated movement management valve. Items of this series is usually widely utilized in the business of logistic gadgets such as fork lift, mini lift table, and so on.
one. The duty of this energy unit is S3,i.e.,thirty seconds on and 270 senconds off.
two. Clean the many hydraulic parts concerned prior to mounting the energy unit.
three. Viscosity of your hydraulic oil shoud be 15~46 cst,which should also be clean and free of charge of impurities, N46 hydraulic oil is recommended .
four. Oil transforming is needed immediately after the initial 100 operation hours,afterwards after each and every 3000 hrs.
five. The energy unit needs to be mounted horizontally.
Material Dealing with Electrical power UNIT 1
This energy unit is made to the fork lift market, consisting of really effective gear pump, DC motor, manual increase and reduced valve, tank, ect. The up and down movement are managed through the lever on the guide release valve, and that is outfitted with an electrical switch to activate the motor. The lowing pace is controlled from the pressure compensated flow handle valve.
one. The duty of this power unit is S3, i.e. 30 seconds on and 270 senconds off.
two. Clean every one of the hydraulic elements concerned just before set up of the electrical power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which should also be clean and totally free of impurities, N46 hydraulic oil is recommended .
4. Oil modifying is needed after the initial one hundred operation hrs, afterwards when just about every 3000 hours.
five. The power unit shown is made to be mounted horizontally.