In smaller greenhouses, a manual program opened and closed by hand could possibly be installed. These work easiest when the screen material is supported by a monitor system.
Start time – when in the morning will the display screen system start Motor Gearboxes For Greenhouse operation
Stop time – when in the afternoon will the display system stop operation
Light level – in what light intensity will the screen be activated either to open or close
Maximum/minimum temperature – what exactly are the limitations of temperature desired
Maximum/minimum humidity – What exactly are the limitations of humidity desired
Gap positions – this pieces the percent open up or close position under different circumstances such as early on a winter morning to reduce thermal shock or through the summer to supply better shading. The gap techniques and speed of motion can be controlled in some systems.
Time delay – under changeable weather conditions this avoids frequent opening and closing
Wind speed – To lessen temperature loss, the screen can be closed early below high wind speed conditions
Snow detection – this may open the screen and turn on the heat when it begins to snow.
The typical system uses nylon monofilament or stainless cables to support the screen materials. The screen material can either rest on top of the network of cables or end up being suspended by hooks from the cables. A gearmotor powers a drum or rack and pinion that techniques the industry leading of the screen materials. Control can be either with a manual switch or electronic controller.
Based on the over, the grower is required to enter the next parameters in to the controller:
A weather station is required to provide outdoor light level, temperature, humidity, wind and rain or snow conditions.