This electrical power unit characteristics a everlasting magnet motor that has a energy up gravity down circuit. Activate the start out solenoid to start the motor to lift the machine. The lowing motion is activated through the solenoid valve using the lowering velocity controlled from the stress compensated flow handle valve. Goods of this series could be broadly utilized in the sector of logistic units this kind of as fork lift, mini lift table, and so forth.
one. This power unit is of S3 duty cycle, i.e.,non-continuous operation, 30 seconds on and 270 seconds off.
2. Clean each of the hydraulic elements concerned ahead of installation of the power unit.
3. Viscosity on the hydraulic oil shoud be 15~46 cst, which must also be clean and free of impurities. N46 hydraulic oil is advised.
four. This power unit is created to be mounted vertically.
5. Check the oil level from the tank just after the 1st star of your power unit.
six. Oil modifying is needed following the first one hundred operation hrs,afterwards the moment just about every 3000 hrs.
7. More pump sizes and tank sizes are avaiable on request.