What is pin bush coupling?
Industrial Pin Bush Coupling
The function of a flexible coupling is to transmit torque from on shaft to some other where limited mis alignment might occur and to absorb shock loads.
We are one of the prominent institutions engaged in providing Pinbush Coupling which has highly developed rubber substances for use in bushes to absorb shock, tensional vibrations and slight misalignments. These couplings are flexible in type and are generally of the cushioned travel type that can be used for transmitting the torque through optimum tensile steel bolts to the machine input. Moreover, they are simple and compact in construction which makes these capable of transmitting huge torques at maximum speeds. These kinds of couplings generally permit travel in either path and need neither lubrication, nor adjustment after fitting.

Pin and Bush Couplings
Vertical/horizontal mounting
Adsorbs vibrations
Progressive torsion planting season properties because of primarily pressurised bushings
Fail-safe in case of the inability of the bushings
Convenient replacement of bushings without disassembly of the coupling halves
Free of maintenance, no lubrication necessary
Declaration of conformity relative to ATEX 2014/34/EU possible
Typical applications
Pump drives
Belt drives
General mechanical engineering

Ever-electrical power pin and bush coupling
Ever-power couplings contain a set of resilient BARREL Shaped bushes with pins & nuts and two flanged hubs of graded cast iron.
The special BARREL shaped bushes let the MISALIGNMENT EVERYWHERE and present extra torsional flexibility in comparison with plain bushes.
These couplings are suitable for standard engineering application requiring reliable power tranny even under conditions of shaft misalignments which are generally unavoidable.

Ever-power couplings are being used as flexible compensating couplings in every applications requiring a trusted transmission of torque under harsh operating conditions. The conical chairs of the buffer pins facilitate installation and guarantee maintenance-free procedure. The optimized form of the barrelled buffers permits basic plug-in assembly and low circumferential backlash. A large number of type variants can be found, electronic. g. with brake disk, axial play limiting machine, or brake engine couplings.
To the very best of the page
Examples of application
Ever-power couplings are used on the whole mechanical engineering both when high-swiftness couplings and for high torques, e. g. in
Screw pumps
Cement processing machines7
To the top of the page
Benefits of the product
Flexible fail-secure pin and bush coupling for moderate up to high torques
Compact style; low weights and mass moments of inertia
Independent of course of rotation (ideal for reversing operation)
Suitable for plug-in assembly (blind assembly, bell housing installation)
Torque range of the standard series between 200 Nm and 1,300,000 Nm
May be used in potentially explosive atmospheres; certified acc. to 94/9/EC (ATEX 95)

Pin & Bush Couplings
Simple and nearly indestructible, the pin and bush design and style is perfect for applications that involve basic safety, such as for example elevator drives or fire pumps. The fail-safe facet of the design enables the coupling to become serviced at comfortable intervals, should the elastomer become damaged.
The elastomer elements reduce vibration and dampen impact loads, as well as accommodate misalignment up to 0.5 degrees. The original bushing is normally a neoprene elastomer with a graphite impregnated bronze sleeve. They are still available, in addition to a contemporary version of the concept: urethane bushings.

Ever-ability also manufactures many customized variations of this coupling including brake drum and shear pin type couplings.
Damping shaft coupling that can be used universally to compensate for shaft misalignment
Nominal torque range from TKN = 19 Nm up to 62,000 Nm with 23 sizes
Temperature range: from -50 °C to +100 °C

Robust and verified a million times
Because of their torsional overall flexibility, Ever-power couplings can maneuver critical torsional vibrations away from the operating area of mechanical equipment in such a way that no negative effects on the drive train are to be expected. Ever-electricity couplings are constructed of high-quality cast iron. The adaptable elements manufactured from synthetic rubber (Buna-N) are available in different levels of hardness for most applications. Metal pins and flexible factors are designed so that no dress in occurs if they are properly fitted.

Your benefits at a glance
Fail-safe for optimum operational reliability
Three-part type suitable for plug-in assembly and simplified replacement of elements
Choice of elastomer hardness to suit various applications
Ideal for use in potentially explosive environments; certified according to
2014/34/EU (ATEX)
High degree of availability of parts ex stock

Established as an professional standard, worldwide used
Mining and Cement: heating system technology
Coal and oil: pumps, fans, compressors, air condensers
Power Generation: pumps, followers, compressors, air condensers, normal water turbines
Chemical substances and Pharmaceuticals: driers, lauter tuns, pumps, lovers, compressors, mixers, agitators, reactors
Plastic and Rubber: single- and double-screw extruders
Pulp and Paper: wastewater purification plants
Water and Wastewater: aerators
Food and Beverage: lauter tuns, reactors, agitators, mixers

Did you know?
Original Ever-power elastomers ensure the perfect operation of one’s body. The flexible elements of the Ever-electricity coupling are at the mercy of compression. If the adaptable elements are irreparably destroyed, the hub parts come into contact with metal. This “emergency operation capability” is required, e.g., in the case of fire pump drives.