Our worm gear reducers offer a choice of a solid or hollow output shaft and feature an adjustable mounting placement. Both the SW-1 and the SW-5, however, can endure shock loading better than other reduction gearbox designs, making them well suited for demanding applications.
Rugged compression-molded glass-fill up polyester housing
Light weight and compact
Range of ratios
SW-1, 3.5:1 to 60:1
SW-5, 5:1 to 100:1
Solid or Hollow output shaft
Adjustable mounting position
Worm Gear Speed Reducers is rated 5.0 out of 5 by 1.
8 Ratios Available from 5:1 to 60:1
7 Gear Box Sizes from 1.33 to 3.25″
Universally Interchangeable Design for OEM Replacement
Double Bearings Applied to Both Shaft Ends
Anti-Rust Primer Applied Outside and inside Gearbox
Shaft Sleeve Protects All Shafts
S45C Carbon Metal Shafts
Flange Mount Versions for 56C and 145TC Motors
Our regular 700 Series – the heart of EP Gear’s swiftness reducer product line – has been serving industry reliably for over 40 years. Its proven modular style has set the sector standard for performance and is the most imitated item in today’s worm gear rate reducer marketplace. But why accept a knock-off when you’re able to have the initial – from EP Gear.
11 basic single reduction sizes
8 basic double reduction sizes
1/6 – 25 HP
5:1 – 100:1 ratios single reduction
100:1 – 3600:1 ratios double reduction
Non-flanged, NEMA C-face quill, and coupled input styles
Projecting and hollow result shafts
Projecting worm reduction gearbox diameters from 1/2″ to 2-1/4″
Hollow result bore diameters from 5/8″ to 3-7/16″ (with over 20 bore sizes in share)
The 700 Series’ huge oil reservoir provides efficient heat dissipation and lubrication for longer operating existence.
Its multi-position mounting versatility allows for installation in virtually any position.
Housings are straddle-milled, best and bottom level, for precise alignment of horizontal and vertical bases.
Internal baffles assure positive, leak-free venting.
The 700 Series’ rugged housing, fabricated of fine-grained, gear-quality cast iron, provides maximum strength for maximum durability, and also greater precision during worm and gear alignment.
EP Gear’s 700 Series high-strength bronze worm gear is straddle mounted between heavy-duty tapered roller bearings to increase thrust and overhung load capacities, sizes 713-760.
Our 700 Series’ high-strength steel output shaft assures convenience of high torque and overhung loads.
Pipe plugs allow easy fill, level, and drain in virtually any mounting position.
The 700 Series’ super-finished oil-seal diameters on both input and output shafts extend seal lifestyle.
Both 2D and 3D CAD drawings can be found in our eCatalog.
Right angle gearboxes (worm and planetary) are rugged and built for 90° turns. Inline reducers (parallel shaft and planetary) are an ideal match for motors with high input speeds, or when gearmotor effectiveness is important. Get in touch with our technical sales personnel for help determining which gearbox solution is best for you.
RIGHT ANGLE REDUCERS
WORM GEAR REDUCER
EP’s worm equipment reducers are designed with a hollow bore and allow for a corner change with optional dual result. The reducers come in 12 ratios ranging from 5:1 to 100:1, with non-back-drivable ratios 30:1 and higher. Our right angle gearboxes were created with five mounting options providing versatility when incorporating the reducer into item.
RIGHT ANGLE BEVEL GEARBOX
The right angle bevel gearbox combines the top features of our right angle worm and planetary inline reducers. With a good and efficient right angle configuration, our correct angle planetary gearboxes offer a robust solution. The right angle bevel gearbox comes in 18 ratios which range from 5:1 to 1000:1, and it is back-drivable at all ratios.
I-SERIES PLANETARY GEARBOX
Our I-Series little planetary gearbox configurations provide the smallest footprint and quietest procedure of our acceleration reducers. These gearboxes are made to deal with varying loads with little backlash. With framework sizes 52cm, 62cm, and 81cm, 12 ratios which range from 5:1 to 308:1, we’ve a solution to suit your needs. Our 52 frame size is also available with plastic gears for noise-delicate applications.
INLINE PLANETARY GEARBOX
Our inline planetary gearbox configurations supply the highest effectiveness and best result torque of most our quickness reducers. These gearboxes are created to manage varying loads with small backlash. Planetary equipment reducers operate more quietly than parallel shaft reducers. With 18 ratio choices which range from 5:1 to 1000:1, we have a solution to fit your needs.
PARALLEL SHAFT GEARBOX
Parallel shaft gearboxes are the best choice for continuous duty applications. Their gear cluster design provides an effective method for dissipating temperature. Parallel shaft gearboxes possess the shortest length of our inline equipment reducer options so they work well in conditions with limited space. Our parallel shaft gear reducers provide an affordable drop-in substitute solution for most small parallel shaft gearmotors.
Wormwheel gearboxes pass several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm gear reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement in which a equipment in the kind of a screw, also known as a worm, meshes with a worm equipment. These gears are usually created from bronze and the worms are steel or stainless steel.
While worm gears are similar to a spur equipment, the worm gearboxes are significantly smaller than other equipment reduction boxes. A main benefit of worm equipment reducers is definitely that they generate an output that’s 90° from the insight and can be utilized to transmit higher torque or decrease rotational speed. Most often, a worm gearbox offers right hand threads; to improve the path of the result, a left-hand thread worm gearbox is necessary.
Worldwide HdRS133-10/1-R Cast Iron Right Angle Worm Gear Reducer 10:1 Ratio