rotary cutter gearbox
Substitute Rotary Cutter gearbox, 40hp rated, one-3/8″-6 spline enter shaft, one.fifty seven” X 12 tapered spline output shaft and 1:one.forty seven velocity up ratio.
These gearboxes have a square housing configuration and are similar in mounting and ratio to the spherical configuration gearboxes.
These are authentic tools gearboxes
This gearbox will not suit the IM400, IM500 and IM60 designs as they have a sleek input shaft!
Compare with similar items
rotary cutter gearbox
Alternative Rotary Cutter gearbox, 40hp rated, one-three/8″-6 spline input shaft, 1.fifty seven” X twelve tapered spline output shaft and 1:1.forty seven speed up ratio. These gearboxes have a square housing configuration and are similar in mounting and ratio to the round configuration gearboxes. These are unique gear gearboxes on the IM402, IM502 and IM602 collection rotary cutters which featured slip clutch PTO shafts. This gearbox will not in shape the IM400, IM500 and IM60 versions as they have a easy input shaft! If your gearbox has a twelve spline output shaft and a 1-3/eight” – six spline input shaft this gearbox will perform. Bolt pattern is 4-three/four” on centre gap to gap and 6-three/4″ centre to middle of bolt gap on diagonal. The mounting holes type a sq. bolt pattern.
rotary cutter gearbox
RC-twenty Collection
Technical specs
Torque: 1,750 – 3,267 lb.-in.
198 – 369 Nm.
Ratios: 1:2.five, one:two.83
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 16 oz. (.47 L)
Excess weight: 34 lbs. (15.4 kg)
Programs
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-27 Collection
RC-30 Collection
Requirements
Torque: 2,800 – four,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.forty seven, 1:one.seventy one, 1:one.93
Seals: Triple Lip Spring Loaded
Bearings: Deep Groove Ball
Oil Cap: 23 oz. (.68 L)
Excess weight: 51 lbs. (23.one kg)
Applications
Ending Mowers Rotary Cutters
Rotary Slashers Toppers
RC-fifty one Sequence
Requirements
Torque: 2,800 – 4,667 lb.-in.
316 – 527 Nm.
Ratios: one:1.forty seven, 1:1.seventy one, one:1.ninety three
Seals: Triple Lip Spring Loaded
Bearings: Tapered Roller/ Deep Groove Ball
Oil Cap: 27 oz. (.eighty L)
Fat: fifty six lbs. (25.4 kg)
Programs
Rotary Cutters Rotary Slashers
Gears: Accessible with both straight bevel or spiral bevel gearing.
Electricity: Hp & Torque based on AGMA formulation for ongoing duty plus a services or load class element.
Shafting: Numerous dimensional, metallurgical, and warmth-treat possibilities obtainable.
Bearings: Geardrives accessible with numerous bearing daily life choices.
Lubrication: Drives accessible with different lubes dependent on working qualities
Right here are few even more write-ups connected to rotary cutter gearbox