The EP Series Helical Bevel Reducer provides unmatched performance, durability, and style flexibility. This unit offers torque capacities up to 20,000 Nm (14,750 ft lbs).
The cat4CAD software enables simple interactive product selection of the complete gearbox and gear-electric motor system. Cat4CAD supports you in selecting and configuring the products, gives you the opportunity to print out considerable technical data sheets, and generates complete 2D drawings and 3D models for direct download.
11 sizes
Input power capacities from 0.16 to 120 HP
Gear ratios from 5:1 to 8900:1
Torque capacities to 20,000 Nm
Inverter duty course F insulated motor windings
Class 12 Helical and Spiral Bevel Gears: Provides higher efficiencies and better torques in smaller sized sizes.
Multiple Input Options: Integral gear motors, inch or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Options: Hollow bores and shrink disks for shaft mounting, inch and metric output shafts, mounting pilots and flanges provide a wide range of design solutions.
UNIBLOCK Housing: For maximum rigidity, universal installation on five sides or with a torque arm.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to accept brakes, encoders or pressured cooling.
High efficiency engine design available
Innovative self-locking, self-aligning taper shaft electric motor connection
Gearbox supplied factory filled with synthetic oil
Corrosion and shock resistant cast iron housing
High efficiency helical-bevel gears. 98% per stage
Normally closed breather with multiple locations (Optional OtN2000)
Double lip seals on heat treated, plunge ground shafts
Shaft mounting options include tapered bushings designs
This is a comprehensive offering of energy-efficient, right angle helical bevel enclosed gearing. It is offered as gearmotors and a variety of reducers with torque capacities up to 119,000 inch pounds. Housing styles include footed, encounter and flanged configurations. Gearmotors can be found in three stage high efficiency designs through 50 HP and single phase to 5 HP. We offer a selection of input and result shaft choices. Additionally, you will find fixed and variable speed motors and selection of ratios obtainable in this product offering.
Features
Accommodates insight power from ¼ Hp to 75Hp
Torque rankings up to 119,489 in-lbs
Reduction ratios up to 7,500:1
Helical – bevel – helical gear train offers cost effective high and low speed solutions
Up to 94% efficient
Four input possibilities for all units
Two output flange choices – B5 and B14
Multiple output shaft interfaces
Essential dimensions interchangeable with major competitors
Modifications / Accessories
Integral Gearmotor
Clamp Collar C-Face Input
Solid Shaft Input
3-Piece Coupled C-Face Input
CEMA Screw Conveyor Adapter
EZ Kleen Washdown Package
XT Output Seals
Backstop
Heavy Duty Output Bearings
Inch or Metric Dimensions
Common Applications
Troughing Belt Conveyors
Slider Bed Conveyors
Mixer Drives
Screw Conveyors
Bucket Elevators
helical bevel gear reducer General Industrial Machinery
Common Industries
Aggregate and Cement
Air Handling
Chemical, Oil, and Gas
Food, Beverage, and Pharmaceutical
Paper and Forest
Unit and Baggage Handling
Water and Wastewater
As per the developing and varying demands of customers, we offer a wide range of Helical Bevel Equipment Reducers. The technological content material of our products allows for an extraordinary overall performance/lifespan ratio. The highly versatile Helical Bevel Gear Reducers we offer are successfully used in a multitude of industrial and civil applications. They are B-Series units that offer excellent affordability and output torque/weight ratio, especially due to the fact they need not a lot of servicing. Besides these, our products are available in cast iron (sizes 063 to 163) or light weight aluminum (sizes A42 to A73) casing.
Features:
Sizes: 060-080-100-125-140-150-160
Available versions: B-fitted for electric motor coupling, IB with input shaft, CB with small motor, PB-fitted for engine coupling with flexible joint
Casing with feet FC, flange SC and universal UC
Switch on to 90 kW
Gears hardened and tempered with shaved or surface profile
Gearing with 3 reduction stages
Gleason spiral bevel equipment pairs with run-in profile, mounted as second reduction stage for a higher resistance
Reduction ratios between 5, 71 and 187, 24
Torque max 13.000 Nm and admissible radial loads max 80.000 N
High-strength casings optimized with FEM analysis and input and result flanges of grey cast-iron G200 to make sure best level performances and high reliability
Load capacity calculated and verified according to ISO 6336 and AGMA 2001
Painted with RAL 5010 blue epoxy-polyester powder
Accessories: torque arm, output flange, result shaft, shrink disk, backstop device, protection cover package, viton oil seals, reinforced result, assemble/disassemble kit
Series EP right angle helical bevel gear motors offer ratios from 8:1 to 160:1 in three stages or up to 10000:1 in five phases. Motors can be found up to 90kW and output torque capacity up to 12,300 Nm.
The series EP helical bevel gear motor is designed with integral cast feet for base or end mounting and can be offered with single or double extended output shafts.
Models are also available since shaft mounted or with output flanges and are designed for installation horizontally or vertically. The models can also be offered with a bolt on torque reaction bracket and all variants can be found possibly motorised or with an insight shaft assembly.
Adding to the brand new selection of Ever-Power helical equipment motors this product takes benefit of our many years of accumulated design experience together with the utilization of top quality materials and elements. The outcome is a number of speed reducing geared motors offering high load transporting capacities, increased efficiency, tranquil running and reliability.
Top features of Helical Bevel Gear Motor
Standard motor connection
Capability to fit double oil seals, on insight and output shaft since required.
All systems are dimensionally interchangeable with other major manufacturers.
Units are produced and assembled from a family group of modular kits for distributor friendliness minimizing inventory and maximizing availability.
Motorized units could be fitted with a backstop module and reducer Systems can be fitted with a backstop and fan.
Applications:
-Conveyors, Agitators, Elevators, Cranes, Crushers
-Helical Bevel gear motors are used in industries such as chemical substances, pharma, packaging, food processing, plastic material and automation etc.
Key Features:
Sizes: A40-A50-A70
Offered versions: EP – fitted for engine coupling, IEP – with input shaft, CEP – with small motor
Cases with feet, flange or universal
Switch on to 4,8 Kw
Gears with shaved or surface profile
Gearing with 2 and 3 reduction stages
Hypoid bevel gears for size A40 and A50, gleason bevel gear pairs for size A70, all with run-in profile
Reduction ratios between 7,62 and 442,76
Torque max 450 Nm and admissible radial loads max 5.500 N on hollow shaft and 10.000 N on solid shaft
Cases in die-cast aluminium alloy
Exceptional mechanical strength while being and particularly lightweight
Load capacity calculated to ISO6336 and verified according to AGMA 2001-B88
Painted with RAL 5010 blue epoxy-polyester powder in according to DIN 1843
Accessories: torque arm, output flange, output shaft.
Generallntroduction of HK series:
Gear Reducer
The EP series gear units, are novel transmission device and made up of Y series motor, helical gear,Arc gear and worm gear. The gears are made of high wear-resisting alloy materials, specially and finely processed.
Advantages:
1: Helical-bevel equipment two-stage reducer
2: Compact framework, high efficiency
3: Quenched 20CrMnTi for gears
4: CE, ISO9001.
5: Compact design, small volume, nice appearance ,and strong capacity to be overloaded.
6: Precise division and wide range for transmission ratio.
7: The efficiency is up to as high since 96% with low energy consumption, strong adaptability and is capable of operating continually in corrosive or damp environment.
8: All- purpose use, convenient and low-price maintenance.
9: New seal device, strong adaptability.
10: Varied range of motor combinations, mouting positions and struture projects.