DC MOTOR PUMP GROUP 1
Common Description
Consisting of the hefty duty DC motor and the CB1S gear pump, this pump motor group is an perfect hydraulic electrical power unit for mobile hydraulic equipments, this kind of as vehicle carriers, mobile aerial lifts, and backup systems.
DC MOTOR PUMP GROUP two
Standard Description
This motor pump consists of four.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP three
Standard Description
This motor pump includes a four.5″ DC motor in addition to a CBSR gear pump which has a standard electrical power up/gravity down circuit having a relief valve, a check out valve and also a solenoid release valve.
Special Notes
one. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, thirty seconds on and 270 seconds off.
2. Clean every one of the hydraulic components concerned prior to mounting the electrical power unit.
three. Viscosity of the hydraulic oil shoud be 15~68 cst, which should really also be clean and absolutely free of impurities. N46 hydraulic oil is recommended.
4. The electrical power unit need to be mounted horizontally.
five. The relief valve stress is preset about 25% higher than the working pressure.
6. Flow control valve for lowing pace adjustment is obtainable unpon request.