A chain and sprocket travel is a type of power transmission in which a roller chain engages with two or more toothed wheels or sprockets, found in motors as a drivefrom crankshaft to camshaft.
Ever-electric power is proud to inventory a wide selection of Sprockets along with this huge variety of agriculture, gardening, cooking and outdoor items. We stand behind all 26,000 items we sell with our Satisfaction Guarantee. Customer Service is the cornerstone of us business, and has recently been for over 50 years.
Application
Ever-power drive sprockets provide durable, reliable service and feature replaceable tooth plates for convenient field maintenance. Tooth plates for 102 and 142 series chain can be found with a segmental/symmetrical reversible tooth profile. The 142 DBL, TPL and also the 175 and 260 series use our nonsymmetrical profile.
Drive sprockets weren’t always designed to be bolted about. At one time these were welded onto the ultimate drive motor and had to be cut off when they were replaced. Eventually, welded-on adapters were installed that allowed the sprocket to always be bolted on, and more modern designs use the bolted approach altogether.
When someone sends in a final drive motor for us to look into or?rebuild/reman, we advise them to remove the sprocket. We don’t need the sprocket in place to evaluate the motor and the added excess weight (which can be significant) unnecessarily improves your shipping costs.
Signs of Sprocket Wear
One’s teeth on a drive sprocket are where you look for wear . They should be tall and flat at the end, not sharp or dished by the end. And the sprocket, and more specifically its teeth, begin to wear, its size becomes scaled-down. This causes what is referred to as a pitch mismatch, where in fact the tooth on the sprocket no more interact with the track backlinks as effectively. This can accelerate the use of the sprocket and reduce the efficiency of your equipment.
If your sprocket shows sign of excessive wear, then its time to replace it before it starts to cause abnormal track wear or starts to negatively affect the performance of your final drive engine.
Preventing Sprocket Wear
Among the key ways to prevent accelerated sprocket have on is to check on the track stress. If the strain is too tight, it will cause put on on the sprocket the teeth. We’ve talked before about the value of keeping the undercarriage clean, and the health of the undercarriage can affect the track tension (particularly if there can be a build-up of dried mud and debris). That’s portion of the motive we put so much focus on keeping the undercarriage clean
Conclusion
With out a functioning drive sprocket, your track drive won’t have the ability to propel your machine. Fortunately, there are ways to help your travel sprocket last longer: keep the track tension at an effective level and maintain your undercarriage clean.
DRIVE SPROCKET
The undercarriage of your track machine should be inspected regularly. If you find early wear or damage to your tracks, a worn sprocket could be the cause.
15 cogs / teeth
16.77 inches in diameter
12 equally spaced bolt holes
Fits the following Bobcat Compact Monitor Loaders: T180, T190, T550, T590
Parts can vary based on your serial number.
All Ever-electricity sprocket tooth profiles are induction hardened to 55 Rockwell C., and are replaceable. The substitute and repair of tooth plate segments does not require removing of the travel shaft, bearings, etc. Ever-power also designs customized split hub elements for retrofit applications that minimize field labor costs.
At primary glance, you might feel that if you’ve seen one travel sprocket, you’ve seen them all. However, Ever-electric power has added an I.D. lip and spiral ring that captivate the needle bearing along with an external snap ring that raises performance and stability. While simple to overlook, it’s this attention to fine detail that the racer features come to anticipate from Ever-power.
An I.D. lip and spiral band that captivate the needle bearing
Exterior snap ring caps sprocket on drum & increases durability
CNC-machined teeth feature a corrosion-resistant finish
Specifics:
Chain Type: #219
Tooth Configuration: Standard