Flexible plastic equipment racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive as high as approx 270 degrees for example on camera focus bands. They also provide an economical answer where a sizable gear is necessary or a longer stretch (up to 2 metres) of linear motion is desired. These racks are compatible with our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER stock racks are made for high precision linear motion applications. You can expect a large selection of racks which range from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Gets the highest strength and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing is applied just within the tooth region. J Series items are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : Heat treated ground gears with high precision and power has excellent cost-performance ratio. J Series products are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a solid rack made of Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and enables downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high strength, extended life span are reasonably priced. J Series items are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Steel Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth height and face width sizes, more compact and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and number of the teeth. J Series items are also available.
Metal Racks w/ Machined Ends (SRF) : Low priced, large selections of modules and quantity of the teeth. J Series items are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large selections of modules and number of tooth. J Series items are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with little dimensional change, absorb lower water than MC Nylon racks. J Series items are also available.
Plastic-type Racks (PR•PRF) : Produced form MC nylon, can be used without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-reducing brass, excellent workability and high rust resistance.
Steel Round Racks (SRO – SROS) : Convenient in applications where the rack has the reciprocal movement. S Type is simple to install.
Stainless Steel Round Racks (SURO) : Same dimensions as SRO racks, except in stainless. Use where rust-resistance is required.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent products with high precision and strength, and low sound and abrasion characteristics.
Steel Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger get in touch with ratio of helical gears.
Molded Versatile Racks (DR) : Used in applications because of its flexibility, where metal racks do no have this attribute. Pinions and add-ons are also available.
Molded Versatile Rack Clamps (SRS) : Used to secure Molded Versatile Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions utilized for molded flexible racks.
Flexible Rack Guideline Rails (ARL) : Instruction Rails for Molder Flexible Racks.
You can expect as standard an array of Racks in Metric and Imperial sizes. Spur Racks can be found in Steel (En8) and up to 2 metres long. STAINLESS and Delrin (Plastic-type material) Racks are created with Spur and Helical tooth forms, square and circular sections up to 400mm in length. Alternative materials are available on demand. Moulded Hostaform Racks can be found to offer a cost-effective alternative where less torque is required.
Variable stiffness can enhance the capability of human-robot interacting. Predicated on the mechanism of a versatile rack and equipment, a rotational joint actuator named vsaFGR is usually proposed to regulate the joint stiffness. The versatile gear rack could be regarded as a mixture of a nonlinear elastic component and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness can be in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-order of the apparatus displacement, and almost independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The apparatus displacement with regards to the flexible gear rack is perpendicular to the joint loading power, so the power necessary for stiffness regulating is really as low as 14.4 W, providing advantages of energy conservation. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.
Flexible plastic gear racks in 0.8 Mod (32DP) pitch. These racks can offer an easy to set up rotational drive of up to approx 270 degrees for example on camera focus bands. They also provide an economical answer where a sizable gear is required or an extended stretch (up to 2 metres) of linear motion is preferred. These racks are appropriate for our 0.8 Mod and 32 DP pitch Spur Gears.
EVER-POWER share racks are created for high precision linear movement applications. You can expect a large collection of racks ranging from module 0.5 to 10 and lengths from 100 to 2000 mm.
Hardened Surface Racks (MRGF – MRGFD) : Has the highest strength and precision in the EVER-POWER standard rack series. Bolt holes can be remachined as carburizing can be applied just within the tooth area. J Series products are also available.
Hardened Floor Racks (KRGF-H – KRGFD-H) : High temperature treated floor gears with high precision and strength has excellent cost-overall performance ratio. J Series items are also available.
Hardened Racks (KRF-H/KRFD-H) : This is a strong rack manufactured from Chromoly steel, treated by carburizing. Has high-strength, high wear level of resistance, and allows downsizing of SR racks. J Series items are also available.
Hardened Racks (SRF-H/SRFD-H) : Steady Hardened racks with high power, extended life span are affordable. J Series products are also available.
Thermal Refined Ground Racks (KRG – KRGF – KRGD) : High strength and abrasion-resistant for precision linear motion.
Metal Racks w/ Machined Ends (SRAF – SRAFD – SRAFK) : This gear rack gets the same tooth elevation and encounter width sizes, smaller sized and reasonably priced compared to SRF Racks
Steel Racks (SR) : Low cost, large choices of modules and quantity of teeth. J Series products are also available.
Metal Racks w/ Machined Ends (SRF) : Low cost, large selections of modules and amount of teeth. J Series products are also available.
Racks with Bolt Holes (SRFD – SRFK) : Low priced, large choices of modules and amount of tooth. J Series products are also available.
Stainless Steel Racks (SUR•SURF•SURFD) : Ideal for food machinery because of SUS304 materials\’s rust-resistant quality.
Plastic-type material Racks (DRF/DRFD/DRFK) : Plastic racks with small dimensional change, absorb lower water than MC Nylon racks. J Series products are also available.
Plastic Racks (PR•PRF) : Produced form MC nylon, can be utilized without lubrication.
Brass Racks (BSR) : Small pitch racks made of free-slicing brass, excellent workability and high rust resistance.
Steel Circular Racks (SRO – SROS) : Convenient in applications where the rack gets the reciprocal movement. S Type is simple to install.
Stainless Steel Circular Racks (SURO) : Same dimensions as SRO racks, except in stainless steel. Use where rust-resistance is necessary.
Surface Helical Racks (KRHG – KRHGF – KRHGFD) : Excellent items with high precision and power, and low noise and abrasion characteristics.
Metal Helical Racks (SRH – SRHF – SRHFD) : Effective in reducing noise and vibration due to larger contact ratio of helical gears.
Molded Versatile Racks (DR) : Found in applications due to its flexibility, where metal racks do no have this attribute. Pinions and accessories are also available.
Molded Flexible Rack Clamps (SRS) : Used to secure Molded Flexible Racks.
Molded Versatile Rack Pinions (SSDR) : Spur pinions used for molded versatile racks.
Flexible Rack Instruction Rails (ARL) : Instruction Rails for Molder Flexible Racks.
We offer as standard an array of Racks in Metric and Imperial sizes. Spur Racks are available in Steel (En8) or more to 2 metres long. STAINLESS and Delrin (Plastic material) Racks are produced with Spur and Helical tooth forms, square and round sections up to 400mm long. Alternative materials are available on request. Moulded Hostaform Racks are available to offer a cost-effective alternative where less torque is required.
Variable stiffness can improve the capability of human-robot interacting. Predicated on the mechanism of a versatile rack and equipment, a rotational joint actuator named vsaFGR is certainly proposed to regulate the joint stiffness. The versatile gear rack can be regarded as a mixture of a non-linear elastic element and a linear adjusting mechanism, providing advantages of compactness. The joint stiffness is definitely in the number of 217-3527 N.m/rad, and it is inversely proportional to the 4th-purchase of the apparatus displacement, and almost independent from the joint angular deflection, providing advantages of quick stiffness regulation in a short displacement of 20 mm. The gear displacement with regards to the flexible equipment rack can be perpendicular to the joint loading force, so the power required for stiffness regulating is really as low as 14.4 W, providing advantages of energy saving. The high compactness, great stiffness range and low power price of vsaFGR are proved by simulations and experiments.