Helical-worm gearmotors
Due to their style and from being coupled with a helical gear stage, the helical-worm gearmotors S..DR.. have particularly high efficiency. Also, they are extremely low-noise and therefore avoid high noise emission levels.
Low-noise continuous operation: equipment unit combination optimized with respect to efficiency
Do you anticipate a drive option to impress you with its high level of overall performance and efficiency? In that case, we’d recommend our high-quality helical-worm gearmotors EP for you. These could be implemented individually in the modular program. In this manner, they offer you an enormous range of sizes, equipment ratios and engine sizes.
However, their greatest strength is their running smoothness and their extremely low noise development. One thing is certain – With the helical-worm gearmotors EP you are choosing a powerful drive solution that you will hardly even hear.
The overall concept offers you a lot more practical product characteristics and benefits. Included in these are the significantly higher efficiency of the helical-worm combinations as opposed to single helical-worm gear models. This is how you save extra energy in the procedure of your systems and so are able to noticeably reduce ongoing operating costs.
You will receive the low-noise helical-worm gearmotors EP. – to fit your individual requirements – with an array of AC motors. In addition, you can freely configure all the relevant properties. In this way, you can effectively make use of all the benefits offered by this mixture of low-noise helical-worm gear unit and performance-optimized electric motor. Even greater variance may be accomplished thanks to the optional flange or foot-mounted style and by choosing between solid and hollow shaft.
Save money and time
By opting for one of our gearmotors, you already are saving time and money with this selection and project planning. This is because our modular system enables a multitude of combination options for gear systems and motors. You can consequently reduce operating costs, depend on an extended service life and reap the benefits of simplified maintenance that’s characteristic of our brand.
Helical-worm gear units
Helical-worm combinations with significantly better efficiency than one helical-worm gear units
Very low-noise operation
Available variants:
Foot- or flange-mounted
B5 or B14 flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disk, splined hollow shaft, or Ever-Power
More on helical-worm equipment units of series EP
AC motors
Combine the helical-worm equipment unit with our AC motors:
Characteristics
Quiet and reliable transmission of torque
High overload capacity
Hardened steel worm equipment and bronze alloy worm steering wheel provide exceptional sturdiness and lengthy service life.
Optional durable bearings deliver high radial and axial load capacity
High strength cast iron casing (SK02050 – SK43125)
Lightweight, corrosion-resistant light weight aluminum alloy housing (SK02040.1)
Application Specific Solutions
Fields of use
Intralogistics
Material handling
Presses
Version
Solid and Hollow shaft (keyed, shrink disc ) Designs
Available in footed, shaft attach or flange mounted configurations
Right Angled gear units
Your advantages
Economical operation
Low noise
High permitted overhung loads
Helical-worm Gearmotor S Series
S series
Ever-Power helical-worm gear devices are helical/helical-worm combinations, so they are better than normal helical-worm equipment units. Due to their outstanding efficiency, these drives can be used in every commercial sector and helical worm gear motor tailored to individual torque and rate requirements. The decrease ratios afforded by the helical-worm equipment stage and the low noise levels during procedure make these gearmotors ideal low-cost solutions for simple applications.
Available versions:
Foot-mounted or flange-mounted
B5 or B14 Flange-mounted
Solid or hollow shaft
Hollow shaft with keyed connection, shrink disc, splined hollow shaft
Helical worm geared motors
Tough, compact, eye-catching!
Due to the unique mixture of optimized worm wheel material with unique lubricants, optimized form, this powerful engine achieves high levels of performance and torque. The casing machined on all sides enables diverse mounting options. Dual chamber shaft seals are used as standard.
The low contour design helps it be ideal for implementing applications e.g. in the food industry. The housing does not have any recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Technical Data
Number of sizes:6
Power Range:0.12 – 7.5kW
Output torque range:50 – 1,300Nm
Ratio:3 – 3,400
Output option:result shaft, output shaft on both sides, hollow shaft, hollow shaft with shrink disc
Assembly/installation:uniblock, flange, torque arm, foot
Class 12 Helical and hardened and floor worm gears: Provides higher efficiencies and higher torque capacity in smaller sized sizes.
Multiple Input Options: Integral gear motors, ” or metric shafts, NEMA, IEC, and servo adapters provide unmatched drive versatility.
Multiple Output Choices: Hollow bores and shrink disks for shaft installation, inch and metric result shafts, installation pilots and flanges offer a wide variety of design solutions.
UNIBLOCK Housing: For optimum rigidity universal installation on five sides or with a torque arm.
Sealed for Washdown: Keeps contaminants and water out.
Worldwide Engine: Multiple leads and windings for globally multi volt/Hz requirements in addition modular design to simply accept brakes, encoders or pressured cooling.
EP gear motors are economical, right-angle, worm-geared motors that install easily in the tightest applications. Economical right angle worm geared motors established new specifications for reliability, effectiveness and economic climate with unparalleled features which includes hollow shafts in the smallest sizes. An inverter friendly design offers easy integration at this point and a future proof remedy. The EP gear electric motor offers total versatility in mounting choices includes shaft, base, face, and flange solutions. The electric motor terminal box could be mounted in alternative positions rotated in 90º steps around the motor frame offering for unparalleled integration options.
EP gear motors adhere to UNITED STATES and International specifications, including NEMA, IEC, CSA, and CE, the EP series permits worldwide acceptance, a genuine total option for our global clients.
Superior protection of IP65 acc. to IEC 529 assures you that the EP series is definitely dirt tight and hose proof,and can be used outside or in wet and dusty environments without the use of additional enclosures. Full rated output is offered by the result shaft of the machine.
Product Features
Power ranking up to 5,5 kW.
Torque 25 … 1.000 Nm
Output Speeds 0,2 … 300 min-1
versatile installation possibilities
Completely enclosed, sealed against dust and water spray
Lubrication change initial after 15000 hrs
Low noise gearing
Mains connection 110 … 690V, 50/60Hz
Enclosure IP65 (Regular), IP66 (Optional)
Connection Standard with CAGE CLAMP®
Additional features:
Connecting with Connect connectors.
With integrated inverter up to 7,5kW.
EP-Mark
CSA, UL, ATEX, GOST, CCC, ISO9001, ISO14001, OHSAS18001
Motors according to EN 60034
Corrosion category based on DIN ISO 12944-5
C1, C2, C3, C4, C5-I, C5-M
Because of the unique mixture of optimized worm wheel material with special lubricants and optimized shape, this powerful geared electric motor achieves high levels of efficiency and torque. The low contour design helps it be suitable for implementing applications e.g. in the meals industry. The housing has no recesses, which simplifies cleaning – an especially important feature for areas with stringent hygiene requirements.
Nominal torque: 50 – 1300 Nm
Rated power: 0.12 – 7.5 kW
Ratio: 3 – 3400
The 800BR contains a wide selection of compact, durable helical gear drives with extended life performance features and simplified maintenance. The usage of condition of the artwork helical and worm gear combinations affords optimum functionality fulfilling a multitude of ratio requirements. The 800 BR is certainly functionally interchangeable with many major manufacturer’s drives.
SPECIFICATIONS
Dual and triple reduction ratios from 8:1 to 900:1,
4 case sizes – 830, 840, 850, 860
All products shipped pre-lubed for your particular installation position with KluberSYNTH UH1 6-460
Available in NEMA C-face flanged and direct input
Projecting and hollow output shafts
Available accessories
Output flange kits
Torque arm kits
Base kits
Output shaft kits
Product Features
Available in nontoxic white-colored (BK) and stainless epoxy finish (SBK)
Available in hollow or projecting output shafts
Dual and triple reduction ratios
Flanged or foot mounted
All units adaptable to floor, sidewall or ceiling mounting
Helical worm geared motor
0,12 – 5,5 kW
4 – 996 Nm / 6 – 316 rpm
Stober MGS S helical worm geared motor
Efficient small right-angle geared electric motor. A favorably priced substitute for the standard jobs anticipated of a right-angle drive.
5 gear sizes (S0 to S4).
Engine power 0.12 to 5.5 kW.
Rated torque of 23 to 800 Nm.
Gear ratios from we = 6 to 680.
Backlash smaller than 20 arcmin.
Modular, torsionally stiff , leak-proof design.
Helical worm geared motors obtainable with:
Solid shaft with keyway.
Hollow shaft with keyway, optional with cover.
Hollow shaft with shrink disk, optional with cover.
Gear device and AC engine are directly flange mounted, the pinion is upon the motor shaft. This integrated small design can be an essential aspect for the high accuracy and the extraordinary stiffness of EP geared motors.
For vector-controlled inverter procedure usage of an incremental encoder is provided for as standard.
Worm gearboxes and helical worm gearboxes / geared motors (S and SS)
The amount of efficiency in Ever-Power high performance worm gearboxes and helical worm gearboxes is a lot more than 90%. All worm shafts are produced from case hardened alloy steel and the flanks are precision floor. The worm wheels are made from particular wear-resistant bronze. Helical worm gears include a helical equipment. Worm gears with shrink disc, torque limiter, and also adjustable backlash styles are also component of our standard product range.
Worm gearboxes and helical worm gearboxes type S and SS are high-Efficiency gearboxes in universal style. The housings are manufactured from high quality cast iron. The rugget walls and inner ribbing ensure extremely torsional stiff and noise dampening housings. The external ripping offers a rapid heat conducting.
Type S und SS
Technical characteristics:
Optimised size/performance ratio
Designed for permanent operation under rough circumstances
Above average lifespan
Housing produced from top quality grey cast iron with tough walls and internal ribbing
Severe torsional resistance and low noise
Case hardened worm shafts and worms with precision ground flanks
Worm wheels produced from unique bronze
Superior smooth operation
Space saving angular drive
Helical worm gearboxes equipped with helical gear wheel
Low engine speeds
Options:
Basic mounting, flange mounting or universal design
Output shaft available because solid shaft or hollow shaft
Shrink disc, torque limiter,in addition to adjustable backlash
Second shaft end for fitting encoders or brakes
Torque arm
IEC-adaptor
NEMA version
Free input shaft
ATEX specification according to directive 94/9/EG