features a unique embedded magnetic system that increases performance with a keyless tap to unlock the housekeeping cart or perhaps Space Station cart-best console and computerized locking upon door closure. The eliminates lock/key breakage and related substitute costs.

stainless-steel or powder-coated housekeeping carts, newly redesigned with an increase of style and functionality.
Easy keyless entry
Cabinet automatically locks when door closes
Zero broken locks and keys
Able to retrofit on Shuttle Series® rounded-corner carts
The door lock assembly is a component for your washer and tells the washer that the entranceway is closed and locked into place. If the change has shorted out and not locking, it is usually no longer delivering the message to the machine and it’ll not latch into place. If you find that your door won’t close, open, or start, it is more than probably an issue with the locker change assembly. The switch is located behind leading panel. You will need to take away the gasket to attain the switch.
The ignition lock assembly requires a key be inserted to start the engine. It really is essentially a protection device that prevents the vehicle from being started with out a important. The ignition lock assembly also acts as a switch to turn on and shut down the engine, interior capabilities, and the lights. In the ignition assembly will be pins and tumblers that be sure only the correct key will have the ability to start the vehicle. If those tumblers will be worn out or sticking, the ignition lock assembly may not turn even with the correct crucial inserted. If the key or another overseas object breaks off in the ignition, the main element will not be in a position to be inserted completely and won’t turn. At times, the ignition lock assembly may stick in the ‘on’ or ‘run’ location, and the ignition won’t have the ability to turn completely off.
Some keys only easily fit into the ignition one way. Flip the main element over and try it again before replacing the ignition lock assembly.
The steering lock may well not allow the key to carefully turn in the ignition. If the steering lock can be engaged, make an effort pulling on the steering wheel either way while wiggling the key in the ignition.
Ignition key won’t submit the ignition assembly
Essential is stuck in the ignition
Engine won’t turn off
Ignition crucial is cracked due to becoming turned in a stiff assembly.
Important is broken in the ignition lock assembly.
If the ignition lock assembly won’t turn and your vehicle will not start, you could be left stranded looking forward to a tow and a cab. If the ignition assembly can be stuck in the “on” position, your automobile can be left vulnerable to theft with the keys stuck inside. Replace the ignition assembly when symptoms start off.
Lock housing (bottom plate with mounting bolt holes and cover plate with rung install.
Lock hook – solid lightweight aluminum hooks that engage rungs.
Finger – solid light weight aluminum finger – depress the hook to permit disengagement of the rung.
Spring – stainless torsion spring- provides programmed action to assembly.
Shoulder bolts & nuts, 3 each shoulder bolts & nuts contain the parts in place and hold the cover plate over the bottom plate.
Cover plate assembly includes a welded aluminium tube part that accepts the lock rung and rivets. Cover plates are made in 2 different types.

Replacement lock assemblies can be purchased in pairs only and include instructions and all mounting fasteners.