We are focused on research and production of items that meet up with the increasingly complex electronics industry and are trusted in computers, kitchen appliances, consumer electronics, communications, information, industry, medical and different fields.
We also offers patent for 360 level AC PIN interchangeable type adaptor and it is leading the world’s distinctive design.

Ever-Power provides products which are small, lighter, more vitality efficient, and much easier to use.
We selling products all over the world and get the certifications for each of country. And also acquired ISO9001:2015 and ISO 14001:2015 etc. to ensure products meet up with the latest regulations.
Gear adapters install between the vehicle transmitting and power take-away, and can serve several purposes. Mostly, adapters are used to change the direction of rotation of the PTO output shaft. They can be used to space the PTO out and from the transmission case. On some imported or non-SAE regular transmissions they allow for the mounting of common 6-bolt electrical power take-offs. Gear Adapters are available to fit most popular transmissions.
Different body configurations: Can relocate the PTO output shaft to improve clearance for a driveshaft or direct-coupled pump
Changes PTO shaft rotation: Suits PTO rotation compared to that of the driven equipment
Standard and non-standard bolt patterns: Complements SAE typical PTOs to non-standard transmissions

• Frame made of 1/4″, 3′ x 3″ and 1/4″, 2″ x 2″ steel tubing
• Operates from skid steer hydraulics
• Requires a minimum of 16 GPM; optimum of 22 GPM (makes 20 to 40 HP off of the power take off)
• You don’t need to modify electrical power take off shafts
• Adjustable lower arms
• Reinforced heavy duty universal mounting brackets
• Complete with electric motor, hydraulic hoses and toned faced couplers
• Ideal for three point electricity take off gear – snow blowers, mowers, tillers, post hole augers, etc

: Over-running clutches provide a safe means to protect operators and costly machinery from scenarios when the inertia of PTO influenced put into practice exceeds and over-operates the tractor PTO speed. In such a case, the over-operating coupler will free-wheel
smoothly and properly. Over-working clutches will normally hold up against applications requiring up to 65 h.p. at 540 rpm and 100 h.p. at
1000 rpm. Serious shock loads or travel line angularity will certainly reduce this capability
If the distance of your PTO will not fit correctly within a tractor, a PTO adapter can extend the size without needing to replace it for a new one. This adapter comes with an overall length of 7-3/16″ with a male end 1-3/8″ x 6 spline and a lady 1-3/8″ x 6 spline end.
Create additional length on the Pto Adapter china finish of your PTO. This tractor PTO shaft adapter offers both a lady 6 spline end and a male 6 spline end, each end includes a diameter of 1-3/8 in. This enables more connection alternatives and is ideal for anyone that owns a mature tractor since the older parts might not exactly be produced anymore and are less common.
The over-running coupler is an essential part of PTO drive on rotary mowers, bailers, hay conditioners or any implement where inertia of driven unit could be required to over-run generating source. The coupler drives solidly from tractor to implement and free wheels smoothly when apply exceeds tractor PTO speeds. All measurements are nominal.
Converts a 1 1/8″ keyed spline to a 1 3/8″ 6 spline.
Essential with 1000 RPM gearcase upgrade or Three Point Hitch kit for the 25PTOC.
This Small 1000 (21 Spline) to 540 PTO Adapter may be the perfect meet for your Shop Dog. It might be easily carried in the Shop Dog’s hitchpin and PTO adapter carriers.
This is also a good PTO adapter for tractor use. This adapter minimizes the tractor’s PTO from 1-3/8″ x 21 spline to 1-3/8 6 spline (540) and extends the PTO shaft 4-1/8″. It comes with an overall amount of 6-3/8″ and is ranked for tractors up to 70 HP.